Hi,
I am trying to print 2D barcode(PDF417 and QRcode) using CPCL but cannot print.
Printer : QLn320, ZQ520
Code :
! 0 200 200 421 1
B PDF-417 10 20 XD 2 YD 6 C 3 S 1
This is a test PDF417 barcode
ENDPDF
B QR 10 100 M 2 U 10
MA,test QR code
ENDQR
I could print 1D barcode(code128 and code39) using CPCL,
and could print 2D barcode using ZPL,
I see data icon is blinking when I send the above code to printer,
so I'm sure connection has been made.
I can't find out what is wrong with my code.
Could you please help?
Thank you.
Hi Yuriko,
I tried your CPCL on my QLn220 and it successfully printed both bar codes, so it should have at least worked on your QLn320. Could you please send me the allcv report of one of the printers? Here's a walkthrough on how to get that report if you've never done it before.
Points: 0
You voted ‘up’
Hi Samantha,
Thank you for your reply.
Below is the allcv report for my QLn320.
----------------------
bluetooth.
bluetooth.discoverable : on , Choices: on,off
bluetooth.friendly_name : XXQLJ164301731
bluetooth.version : 4.3.1
bluetooth.date : 02/13/2015
bluetooth.local_name : XXQLJ164301731
bluetooth.address : AC:3F:A4:89:AB:03
bluetooth.bluetooth_pin : *
bluetooth.short_address : AC3FA489AB03
bluetooth.radio_version : 3.0
bluetooth.enable : off , Choices: on,off
bluetooth.connected : no
bluetooth.minimum_security_mode : 1 , Choices: 1,2,3,4
bluetooth.connected_security_mode : nc
bluetooth.bonding : on , Choices: on,off
bluetooth.clear_bonding_cache
bluetooth.enable_reconnect : iOS_only , Choices: off,iOS_only
bluetooth.json_config_channel_enable : on , Choices: on,off
bluetooth.page_scan_window : 60 , Choices: 15,60
card.
card.inserted : Inserted
card.cisproc : Processed
card.mfgid : 02df
card.cardid : 9118
card.fncode : 000c
card.idtext1 : Marvell
card.idtext2 : 8787 802.11a/b/g/n SDIO ID: 0C
card.idtext3 :
card.idtext4 :
card.fcrbase : Not Detected
card.fcrlist : NONE DETECTED
card.defcfg : Not Detected
card.cor : Not Present
card.mac_addr : ac:3f:a4:89:ab:02
card.mac_raw : ac3fa489ab02
card.enable : on , Choices: on,off
comm.
comm.baud : 19200 , Choices: 4800,9600,14400,19200,28800,38400,57600,115200
comm.data_bits : 8 , Choices: 7,8
comm.parity : null , Choices: null,odd,even,n,o,e
comm.stop_bits : 1 , Choices: 1,2
comm.dsr : off
comm.handshake : rts/cts , Choices: xon/xoff,rts/cts
comm.halt : no , Choices: yes,no
head.
head.latch : ok
ip.
ip.dhcp.
ip.dhcp.enable : on , Choices: on,off
ip.dhcp.cid_type : 1 , Choices: 0,1,2
ip.dhcp.cid_prefix :
ip.dhcp.cid_value : ac3fa489ab02
ip.dhcp.requests_per_session : 2 , Choices: 1-10
ip.dhcp.request_timeout : 2 , Choices: 2-30
ip.dhcp.session_interval : 10 , Choices: 0-60
ip.dhcp.lease.
ip.dhcp.lease.length : 28800
ip.dhcp.lease.time_left : 28555
ip.dhcp.lease.server : XXX.XXX.0.1
ip.dhcp.lease.last_attempt : 1499301257
ip.dhcp.cache_ip : off , Choices: on,off
ip.dhcp.vendor_class_id : Zebra Technologies ZTC QLn320-203dpi CPCL
ip.dhcp.user_class_id :
ip.dhcp.option12 : on , Choices: on,off
ip.dhcp.option12_format :
ip.dhcp.option12_value : XXQLJ164301731
ip.dhcp.cid_enable : off , Choices: on,off
ip.dhcp.cid_suffix : ac3fa489ab02
ip.dhcp.cid_all : ac3fa489ab02
ip.dhcp.arp_verify : off , Choices: on,off
ip.dhcp.auto_provision_enable : on , Choices: on,off
ip.dhcp.ntp.
ip.dhcp.ntp.enable : off , Choices: on,off
ip.dhcp.ntp.received_servers :
ip.ftp.
ip.ftp.enable : on , Choices: on,off
ip.ftp.execute_file : off , Choices: on,off
ip.ftp.request_password : no , Choices: yes,no
ip.lpd.
ip.lpd.enable : on , Choices: on,off
ip.tcp.
ip.tcp.enable : on , Choices: on,off
ip.tcp.nagle_algorithm : enabled , Choices: enabled,disabled
ip.udp.
ip.udp.enable : on , Choices: on,off
ip.http.
ip.http.enable : on , Choices: on,off
ip.http.admin_name : admin
ip.http.admin_password : *
ip.http.port : 80
ip.http.faq_url : http://support.zebra.com
ip.http.custom_link_name :
ip.http.custom_link_url :
ip.smtp.
ip.smtp.enable : on , Choices: on,off
ip.smtp.server_addr : 0.0.0.0
ip.smtp.domain : ZBRPrintServer.com
ip.pop3.
ip.pop3.enable : on , Choices: on,off
ip.pop3.print_headers : off , Choices: on,off
ip.pop3.verbose_headers : off , Choices: on,off
ip.pop3.print_body : off , Choices: on,off
ip.pop3.save_attachments : off , Choices: on,off
ip.pop3.poll : 240 , Choices: 0-65535
ip.pop3.username :
ip.pop3.password : *
ip.pop3.server_addr : 0.0.0.0
ip.pop3.print_attachments : off , Choices: on,off
ip.snmp.
ip.snmp.enable : on , Choices: on,off
ip.snmp.get_community_name : *
ip.snmp.set_community_name : *
ip.snmp.create_mib
ip.snmp.trap_community_name : public
ip.telnet.
ip.telnet.enable : on , Choices: on,off
ip.telnet.disconnect
ip.addr : XXX.XXX.0.224
ip.netmask : 255.255.255.0
ip.gateway : XXX.XXX.0.1
ip.port : 6101
ip.remote :
ip.ping_remote
ip.netstat : Active Internet connections
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 *.9300 *.* LISTEN
tcp 0 0 *.9200 *.* LISTEN
tcp 0 0 *.9100 *.* LISTEN
tcp 0 0 *.6101 *.* LISTEN
tcp 0 0 *.515 *.* LISTEN
tcp 0 0 *.23 *.* LISTEN
tcp 0 0 *.21 *.* LISTEN
tcp 0 0 *.80 *.* LISTEN
udp 0 0 *.* *.*
udp 0 0 *.65235 *.*
udp 0 0 *.161 *.*
udp 0 0 *.6101 *.*
udp 0 0 *.137 *.*
udp 0 0 *.4201 *.*
udp 0 0 *.* *.*
udp 0 0 *.* *.*
Active UNIX domain sockets
Address Type Recv-Q Send-Q Inode Conn Refs Nextref Addr
1b6130 dgram 0 0 1b8440 0 0 0 /var/wlan0
ip.remote_port : 10013
ip.remote_autoconnect : off , Choices: on,off
ip.bootp.
ip.bootp.enable : off , Choices: on,off
ip.mirror.
ip.mirror.auto : off , Choices: on,off
ip.mirror.username : user
ip.mirror.password : *
ip.mirror.server : 127.0.0.1
ip.mirror.path : Zebra
ip.mirror.freq : 0 , Choices: 0-65535
ip.mirror.fetch
ip.mirror.version : Nov 18 2015 17:11:57
ip.mirror.freq_hours : 0 , Choices: 0-100
ip.mirror.error_retry : 0 , Choices: 0-65535
ip.mirror.feedback.
ip.mirror.feedback.auto : off , Choices: on,off
ip.mirror.feedback.path : Zebra/feedback
ip.mirror.feedback.freq : 0 , Choices: 0-65535
ip.mirror.feedback.odometer : 0 , Choices: 0-4294967295
ip.mirror.success : no
ip.mirror.success_time : Jul 06 2017 00:33:56
ip.mirror.last_time : Jul 06 2017 00:33:56
ip.mirror.last_error : No Error
ip.mirror.mode : ftp , Choices: ftp,sftp
ip.mirror.reset_delay : 5 , Choices: 0-900
ip.mirror.interface : both , Choices: both,wired,wireless
ip.mirror.appl_path :
ip.ping_len : 56 , Choices: 56-65535
ip.dns.
ip.dns.domain :
ip.dns.servers : 210.145.254.170 125.170.93.234
ip.discovery.
ip.discovery.enable : on , Choices: on,off
ip.discovery.port : 4201
ip.roam_packet : on , Choices: on,off
ip.arp_interval : 0 , Choices: 0-30
ip.primary_network : 2 , Choices: 1,2
ip.active_network : wireless
ip.ntp.
ip.ntp.enable : off , Choices: on,off
ip.ntp.servers :
ip.ntp.log
ip.port_alternate : 9100
ip.port_json_config : 9200
ip.port_single_conn : 9300
ip.port_single_conn_idle_timeout : 180 , Choices: 0-3600
label.
label.x_move : 0 , Choices: -575-575
label.y_move : 0 , Choices: -32768-32767
media.
media.status : ok
media.sense_mode : gap , Choices: bar,gap
media.tof : 0 , Choices: -400.0-400.0
media.type : journal , Choices: label,journal
media.width_sense.
media.width_sense.enable : off , Choices: off
media.width_sense.in_mm : 72.1
media.width_sense.in_cm : 7.21
media.width_sense.in_dots : 576
media.width_sense.in_inches : 2.837
media.printmode : rewind , Choices: tear off,peel off,rewind,cutter,delayed cut,linerless peel,linerless rewind,linerless tear
media.speed : 3.6 , Choices: 1.0-5.0
media.feed_length : 2030 , Choices: 0-20000
media.feed_skip : 5 , Choices: 0-50
media.draft_mode : off , Choices: on,off
sensor.
sensor.paper_supply : ok
sensor.peeler_present : Present
wlan.
wlan.operating_mode : infrastructure , Choices: ad hoc,infrastructure
wlan.essid :
wlan.current_essid :
wlan.station_name : ZEBRA
wlan.current_tx_rate : 65
wlan.encryption_mode : off , Choices: off,40-bit,128-bit
wlan.associated : yes
wlan.encryption_index : 1 , Choices: 1,2,3,4
wlan.encryption_key1 : *
wlan.encryption_key2 : *
wlan.encryption_key3 : *
wlan.encryption_key4 : *
wlan.leap_mode : off , Choices: on,off
wlan.leap_username :
wlan.leap_password : *
wlan.power_save : on , Choices: on,off
wlan.auth_type : open , Choices: open,shared
wlan.preamble : long , Choices: long,short
wlan.bssid : 10:6F:3F:88:45:A6
wlan.firmware_version : 14.66.35.p51
wlan.signal_strength : 100
wlan.poor_signal_threshold : 0 , Choices: 0-100
wlan.international_mode : off , Choices: on,off
wlan.roam.
wlan.roam.signal : 40 , Choices: 1-75
wlan.roam.interval : 5 , Choices: 5-255
wlan.roam.interchannel_delay : 400 , Choices: 10-30000
wlan.roam.max_chan_scan_time : 100 , Choices: 10-500
wlan.roam.rssi : 80 , Choices: 60-125
wlan.roam.max_fail : 10 , Choices: 2-75
wlan.roam.monitor : off , Choices: off,print,serial,file
wlan.channel_mask : 0x3FFF , Choices: 14 bits
wlan.channel : 13
wlan.wpa.
wlan.wpa.enable : on , Choices: off,on
wlan.wpa.authentication : psk , Choices: psk,leap,peap,eap-tls,ttls,fast
wlan.wpa.psk : *
wlan.wpa.wpa_version : WPA2
wlan.wpa.groupkey_ciphersuite : TKIP
wlan.wpa.pairwise_ciphersuite : AES
wlan.8021x.
wlan.8021x.enable : wpa , Choices: off,on,wpa
wlan.8021x.authentication : psk , Choices: psk,leap,peap,eap-tls,ttls,fast
wlan.8021x.ttls_tunnel : pap , Choices: pap,chap,mschap,mschapv2
wlan.8021x.peap.
wlan.8021x.peap.peap_username :
wlan.8021x.peap.peap_password : *
wlan.8021x.peap.privkey_password : *
wlan.8021x.peap.validate_server_certificate : on , Choices: on,off
wlan.8021x.eap.
wlan.8021x.eap.username :
wlan.8021x.eap.password : *
wlan.8021x.eap.privkey_password : *
wlan.adhocchannel : 1 , Choices: 1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48
wlan.adhocautomode : off , Choices: on,off
wlan.enable : on , Choices: on,off
wlan.encryption_optional : no , Choices: yes,no
wlan.adhoc_last_channel
wlan.secure_ssid : off , Choices: on,off
wlan.ip.
wlan.ip.addr : XXX.XXX.0.224
wlan.ip.netmask : 255.255.255.0
wlan.ip.gateway : XXX.XXX.0.1
wlan.ip.port : 6101
wlan.ip.arp_interval : 0 , Choices: 0-30
wlan.ip.dhcp.
wlan.ip.dhcp.requests_per_session : 2 , Choices: 1-10
wlan.ip.dhcp.request_timeout : 2 , Choices: 2-30
wlan.ip.dhcp.session_interval : 10 , Choices: 0-60
wlan.ip.dhcp.lease.
wlan.ip.dhcp.lease.length : 28800
wlan.ip.dhcp.lease.time_left : 28552
wlan.ip.dhcp.lease.server : XXX.XXX.0.1
wlan.ip.dhcp.lease.last_attempt : 1499301257
wlan.ip.dhcp.cache_ip : off , Choices: on,off
wlan.ip.dhcp.cid_type : 1 , Choices: 0,1,2
wlan.ip.dhcp.cid_prefix :
wlan.ip.dhcp.cid_enable : off , Choices: on,off
wlan.ip.dhcp.cid_suffix : ac3fa489ab02
wlan.ip.dhcp.cid_all : ac3fa489ab02
wlan.ip.dhcp.option12 : on , Choices: on,off
wlan.ip.dhcp.option12_format :
wlan.ip.dhcp.option12_value : XXQLJ164301731
wlan.ip.dhcp.arp_verify : off , Choices: on,off
wlan.ip.protocol : dhcp , Choices: all,bootp,dhcp,dhcp and bootp,gleaning only,rarp,permanent
wlan.ip.default_addr_enable : on , Choices: off,on,saved_ip
wlan.ip.timeout.
wlan.ip.timeout.enable : on , Choices: on,off
wlan.ip.timeout.value : 300 , Choices: 1-3600
wlan.ip.dns.
wlan.ip.dns.domain :
wlan.ip.dns.servers : 210.145.254.170 125.170.93.234
wlan.ip.wins.
wlan.ip.wins.addr : 210.145.254.170
wlan.ip.wins.permanent_source : off , Choices: on,off
wlan.ip.port_alternate : 9100
wlan.ip.port_json_config : 9200
wlan.keep_alive.
wlan.keep_alive.enable : on , Choices: on,off
wlan.keep_alive.timeout : 15 , Choices: 5-300
wlan.wep.
wlan.wep.index : 1 , Choices: 1,2,3,4
wlan.wep.auth_type : open , Choices: open,shared
wlan.wep.key_format : hex , Choices: hex,ascii
wlan.wep.key1 : *
wlan.wep.key2 : *
wlan.wep.key3 : *
wlan.wep.key4 : *
wlan.security : wpa psk , Choices: none,wep 40-bit,wep 128-bit,eap-tls,eap-ttls,eap-fast,peap,leap,wpa psk,wpa eap-tls,wpa eap-ttls,wpa eap-fast,wpa peap,wpa leap
wlan.private_key_password : *
wlan.username :
wlan.password : *
wlan.mac_addr : ac:3f:a4:89:ab:02
wlan.mac_raw : ac3fa489ab02
wlan.11n.
wlan.11n.greenfield : on , Choices: on,off
wlan.11n.short_gi_40mhz : off , Choices: on,off
wlan.11n.short_gi_20mhz : off , Choices: on,off
wlan.11n.rifs : off , Choices: on,off
wlan.11n.20mhz_only : on , Choices: on
wlan.11n.amsdu : off , Choices: on,off
wlan.region_code : japan
wlan.country_code : japan , Choices: japan
wlan.user_channel_list : all , Choices: 1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,all
wlan.allowed_band : all , Choices: 2.4,5,all
wlan.waveagent.
wlan.waveagent.enable : off , Choices: on,off
wlan.waveagent.udp_port : 18100 , Choices: 1-64000
wlan.permitted_channels : 1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140
wlan.active_channels : 1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140
wlan.11d.
wlan.11d.enable : off , Choices: on,off
wlan.11d.current_country : japan
wlan.11d.discovered_channels :
wlan.authenticated : yes
wlan.available : yes
wlan.authentication_error : none
wlan.regulatory_data_version : 1.9
wlan.rts_cts_enabled : off , Choices: on,off
display.
display.contrast : 10 , Choices: 3-15
display.text : Zebra QLn320 FW Ver: V68.19.15Z Baud Rate: 19200 Battery: ok IP Addr: XXX.XXX.0.224 Menu
display.backlight : on , Choices: on,off
display.orientation : normal , Choices: normal,inverted,auto
display.backlight_on_time : 10 , Choices: 0-8191
display.battery_alerts_always_displayed : on , Choices: on,off
display.suppress_all_alerts : off , Choices: on,off
display.status_bar_suppress : off , Choices: on,off
display.language : english , Choices: english,spanish,french,german,italian,norwegian,portuguese,swedish,danish,spanish2,dutch,finnish,japanese,korean,simp chinese,trad chinese,russian,polish,czech,romanian
display.load_card : Z:INDEX320.WML
display.root_wml : INDEX320.WML
display.previous_displayed_card :
display.password.
display.password.current : * , Choices: 0-9999
display.password.input
display.password.length : 4 , Choices: 4-4
display.password.type : numeric , Choices: numeric
display.password.level : none , Choices: selected,all,none
memory.
memory.flash_size : 67108864 Bytes
memory.ram_size : 8388608 Bytes
memory.flash_free : 64538112 Bytes Free
memory.ram_free : 8365056 Bytes Free
power.
power.voltage : 8.03
power.percent_full : 97% Full
power.status : ok
power.low_battery_warning : 6.93(176)
power.low_battery_shutdown : 6.53(166)
power.low_battery_timeout : 60 Seconds , Choices: 0-8191
power.low_battery_timeout_alt : 60
power.inactivity_timeout : 1200 Seconds , Choices: 0-65535
power.inactivity_timeout_alt : 1200 , Choices: 0-65535
power.ascii_graph : ゙イイイイヘテ
power.power_on_cycles : 114
power.design_voltage : 7400 mV
power.design_capacity : 2450 mAh
power.manufacture_date : 9-19-2016
power.relative_state_of_charge : 97 %
power.serial_number : 110
power.cycle_count : 0
power.full_charge_capacity : 2450 mAh
power.health : good
power.date_first_used : 6-26-2017
power.low_battery_audio_alert : 0 , Choices: 0-65535
power.low_battery_text_alert :
power.cradle_shutdown_timeout : 0 , Choices: 0-65535
power.label_queue.
power.label_queue.shutdown : no , Choices: yes,no
power.dtr_power_off : on , Choices: on,off
power.battery_replacement_cyclecount_threshold : NA , Choices: 100-2450
power.battery_replacement_capacityratio_threshold : NA , Choices: 0-100
power.battery_replacement_stateofcharge_threshold : NA , Choices: 0-100
power.battery_led_enable : NA , Choices: on,off
power.battery_led_blink_rate : NA , Choices: 0-127
power.battery_led_on_duration : NA , Choices: 0-255
power.battery_led_off_duration : NA , Choices: 0-255
power.shutdown
file.
file.dir :
- DIR *:*.*
* E:ARIAL.TTF 915212
* E:ARIAL11.CPF 5902
* E:ARIAL14B.CPF 7027
* E:ARIALBD.TTF 864892
* E:CONFIG.SYS 37
* E:GT24NF55.CPF 606448
* E:TT0003M_.TTF 169188
* Z:0.TTF 125904 P 0
* Z:A.FNT 6839 P A
* Z:ALERTCFG.NRD 3719 P
* Z:ALERTCFG420.NRD 3719 P
* Z:AZTEC.BAR 0 P
* Z:B.FNT 7746 P B
* Z:BATTERY.WML 1153 P
* Z:BATTERY420.BMP 398 P
* Z:BATTERY420.WML 12276 P
* Z:BATTERY_CHARGING_LEVEL_0_BAR_ICON.BMP 192 P
* Z:BATTERY_CHARGING_LEVEL_1_BAR_ICON.BMP 192 P
* Z:BATTERY_CHARGING_LEVEL_2_BAR_ICON.BMP 192 P
* Z:BATTERY_CHARGING_LEVEL_3_BAR_ICON.BMP 192 P
* Z:BATTERY_CHARGING_LEVEL_4_BAR_ICON.BMP 192 P
* Z:BATTERY_ELIMINATOR_ICON.BMP 190 P
* Z:BATTERY_LEVEL_0_BAR_ICON.BMP 192 P
* Z:BATTERY_LEVEL_1_BAR_ICON.BMP 192 P
* Z:BATTERY_LEVEL_2_BAR_ICON.BMP 192 P
* Z:BATTERY_LEVEL_3_BAR_ICON.BMP 192 P
* Z:BATTERY_LEVEL_4_BAR_ICON.BMP 192 P
* Z:BATTERY_MENU_ICON.BMP 430 P
* Z:BLUETOOTH.WML 1844 P
* Z:BLUETOOTH420.BMP 400 P
* Z:BLUETOOTH420.WML 8831 P
* Z:BLUETOOTH_ICON.BMP 128 P
* Z:BLUETOOTH_NOT_AVAILABLE_ICON.BMP 128 P
* Z:CANADIAN_STANDARDS_ICON.BMP 112 P
* Z:CODABAR.BAR 0 P
* Z:CODABLK.BAR 0 P
* Z:CODE11.BAR 0 P
* Z:CODE128.BAR 0 P
* Z:CODE39.BAR 0 P
* Z:CODE49.BAR 0 P
* Z:CODE93.BAR 0 P
* Z:COMM.WML 1379 P
* Z:COPYRIGHT_ICON.BMP 112 P
* Z:D.FNT 10648 P CD
* Z:DATA_BLANK_ICON.BMP 128 P
* Z:DATA_ICON.BMP 128 P
* Z:DISPLAY.BMP 398 P
* Z:DISPLAY.WML 1091 P
* Z:DISPLAY_MENU_ICON.BMP 430 P
* Z:DISPLYQR.WML 3113 P
* Z:DOWN_ARROW_ICON.BMP 122 P
* Z:DOWN_ARROW_ICON320.BMP 110 P
* Z:E12.FNT 15691 P
* Z:E24.FNT 47056 P
* Z:E6.FNT 8520 P
* Z:E8.FNT 10893 P E
* Z:EAN-13.BAR 0 P
* Z:EAN-8.BAR 0 P
* Z:EPL1.FNT 17718 P
* Z:EPL2.FNT 20918 P
* Z:EPL3.FNT 24118 P
* Z:EPL4.FNT 32870 P
* Z:EPL5.FNT 58038 P
* Z:EPL6.FNT 8498 P
* Z:EPL7.FNT 8928 P
* Z:ERROR_ICON.BMP 128 P
* Z:ERROR_ICON_TT.BMP 126 P
* Z:ERROR_NONE_ICON.BMP 128 P
* Z:ERROR_NONE_ICON_TT.BMP 126 P
* Z:ETHERNET_ICON.BMP 128 P
* Z:ETHERNET_NOT_AVAILABLE_ICON.BMP 126 P
* Z:F.FNT 13275 P F
* Z:G.FNT 49663 P G
* Z:GS.FNT 5470 P ?
* Z:H12.FNT 11536 P
* Z:H24.FNT 30436 P
* Z:H6.FNT 7247 P
* Z:H8.FNT 7825 P H
* Z:HELP.BMP 398 P
* Z:HELP.WML 860 P
* Z:HELP2.WML 600 P
* Z:HELP_BATTERY.WML 2991 P
* Z:HELP_ICONS.WML 1563 P
* Z:HELP_ICONS420.WML 22136 P
* Z:HELP_ICONS_BATTERY.WML 5624 P
* Z:HELP_ICONS_BLUETOOTH.WML 563 P
* Z:HELP_ICONS_DATA.WML 521 P
* Z:HELP_ICONS_ERROR.WML 496 P
* Z:HELP_ICONS_LATCH.WML 505 P
* Z:HELP_ICONS_MEDIA.WML 491 P
* Z:HELP_ICONS_SIGNAL.WML 2402 P
* Z:HELP_ICONS_WIRED.WML 570 P
* Z:HELP_ICONS_WLAN.WML 2135 P
* Z:HELP_LED.WML 558 P
* Z:HELP_MEDIA.WML 4438 P
* Z:HELP_MENU_ICON.BMP 432 P
* Z:HELP_OTHER420.WML 21286 P
* Z:HELP_PRINTHEAD.WML 4637 P
* Z:HELP_TWOKEY.WML 449 P
* Z:HOMEMENU.WML 1047 P
* Z:HOMEMENU420.WML 2661 P
* Z:I2OF5.BAR 0 P
* Z:IDMATRIX.BAR 0 P
* Z:IND2OF5.BAR 0 P
* Z:INDEX.SHTML 9720 P
* Z:INDEX.WML 1234 P
* Z:INDEX320.WML 865 P
* Z:INDEX420.WML 10512 P
* Z:LANGUAGE.BMP 400 P
* Z:LANGUAGE420.WML 12001 P
* Z:LATCH_BLANK_ICON.BMP 128 P
* Z:LATCH_OPEN_ICON.BMP 128 P
* Z:LOGMARS.BAR 0 P
* Z:LOGO.PNG 20154 P
* Z:MAXICODE.BAR 0 P
* Z:MEDIA.BMP 398 P
* Z:MEDIA.WML 570 P
* Z:MEDIA_BLANK_ICON.BMP 128 P
* Z:MEDIA_ICON.BMP 128 P
* Z:MEDIA_MENU_ICON.BMP 430 P
* Z:MIB200.TXT 46572 P
* Z:MICROPDF.BAR 0 P
* Z:MONOBD15.FNT 5570 P
* Z:MSICODE.BAR 0 P
* Z:NETWORK.BMP 400 P
* Z:NETWORK420.WML 23116 P
* Z:NETWORK_MENU_ICON.BMP 430 P
* Z:NJ20WGL4.FNT 359678 P
* Z:NK20WGL4.FNT 710064 P
* Z:NS20WGL4.FNT 1248664 P
* Z:NT20WGL4.FNT 847138 P
* Z:ONEDOT.BMP 58 P
* Z:P.FNT 116 P P
* Z:PASSWORD.WML 1304 P
* Z:PDF417.BAR 0 P
* Z:PLANETCD.BAR 0 P
* Z:PLESSEY.BAR 0 P
* Z:PORTS.BMP 400 P
* Z:PORTS420.WML 8231 P
* Z:POSTNET.BAR 0 P
* Z:PRINTBTMAC.CMD 287 P
* Z:Q.FNT 116 P Q
* Z:QCKCNTDO.WML 3771 P
* Z:QCKCNTMK.WML 2671 P
* Z:QRCODE.BAR 0 P
* Z:R.FNT 116 P R
* Z:REGDB.NRD 86040 P
* Z:REGISTERED_TRADE_MARK_ICON.BMP 112 P
* Z:REPRINT.NRD 3 P
* Z:RFIDRCPE.XML 32780 P
* Z:RIBBON_IN_ICON.BMP 126 P
* Z:RIBBON_OUT_ICON.BMP 128 P
* Z:RSS.BAR 0 P
* Z:S.FNT 116 P S
* Z:S2OF5.BAR 0 P
* Z:SENSORS.BMP 400 P
* Z:SENSORS420.WML 5111 P
* Z:SERIAL.WML 3807 P
* Z:SERIAL_PORT_MENU_ICON.BMP 430 P
* Z:SETTINGS.BMP 400 P
* Z:SETTINGS.WML 1435 P
* Z:SETTINGS420.WML 13921 P
* Z:SIGNAL_STRENGTH_0_BAR_ICON.BMP 128 P
* Z:SIGNAL_STRENGTH_1_BAR_ICON.BMP 128 P
* Z:SIGNAL_STRENGTH_2_BAR_ICON.BMP 128 P
* Z:SIGNAL_STRENGTH_3_BAR_ICON.BMP 128 P
* Z:SIGNAL_STRENGTH_4_BAR_ICON.BMP 128 P
* Z:SPACE10.BMP 222 P
* Z:SPACE17.BMP 222 P
* Z:SPACE20.BMP 222 P
* Z:SPACE34.BMP 382 P
* Z:T.FNT 116 P T
* Z:TLC39.BAR 0 P
* Z:TOOLS.BMP 400 P
* Z:TOOLS420.WML 27296 P
* Z:TRADE_MARK_ICON.BMP 112 P
* Z:U.FNT 116 P U
* Z:UIF.SS 11596 P
* Z:UNDERWRITERS_LABORATORIES_ICON.BMP 112 P
* Z:UPC-A.BAR 0 P
* Z:UPC-E.BAR 0 P
* Z:UPC-EAN.BAR 0 P
* Z:UP_ARROW_ICON.BMP 122 P
* Z:UP_ARROW_ICON320.BMP 110 P
* Z:UTT.SS 11588 P
* Z:V.FNT 116 P V
* Z:WIRED.WML 1051 P
* Z:WIRELESS.BMP 398 P
* Z:WLAN.WML 1245 P
* Z:WLAN_ASSOCIATED_WITHOUT_STICK_ICON.BMP 126 P
* Z:WLAN_ASSOCIATED_WITH_STICK_ICON.BMP 128 P
* Z:WLAN_AUTHENTICATED_ICON.BMP 128 P
* Z:WLAN_BLANK_ICON.BMP 128 P
* Z:WLAN_NOT_CONNECTED_ICON.BMP 128 P
- 8365056 bytes free R: RAM
- 64538112 bytes free E: ONBOARD FLASH
file.type : "?"
file.delete
file.print
file.run
file.rename
file.dir_format : zpl , Choices: cpcl,zpl
file.drive_info
file.drive_listing
odometer.
odometer.user_label_count : 117 , Choices: 0-4294967295
odometer.user_label_count1 : 127
odometer.user_label_count2 : 127
odometer.total_label_count : 127
odometer.total_print_length : 518 INCHES, 1317 CENTIMETERS
odometer.latch_open_count : 19
odometer.label_dot_length : 0
odometer.media_marker_count : 123
odometer.media_marker_count1 : 518 INCHES, 1317 CENTIMETERS
odometer.media_marker_count2 : 518 INCHES, 1317 CENTIMETERS
odometer.headclean : 518 INCHES, 1317 CENTIMETERS
odometer.headnew : 518 INCHES, 1317 CENTIMETERS
odometer.rfid.
appl.
appl.date : 11/18/2015
appl.name : V68.19.15Z
appl.version : 6819
appl.bootblock : 2.5.11
appl.link_os_version : 3.0
device.
device.reset
device.restore_defaults, Choices: wlan,ip,display,power,bluetooth,all,device.alerts
device.prompted_network_reset, Choices: yes,no
device.friendly_name : XXQLJ164301731
device.company_name : Zebra Technologies
device.product_name : QLn320
device.product_name_submodel : none
device.company_contact :
device.location :
device.position.
device.position.latitude : 0.000000 , Choices: -90.0-90.0
device.position.longitude : 0.000000 , Choices: -180.0-180.0
device.position.altitude : 0.000000 , Choices: -10000.0-406700000.0
device.position.accuracy : 0.000000 , Choices: 0.0-406700000.0
device.status : ready
device.idle_display_format : fw version , Choices: fw version,ip address,mm/dd/yyyy 24 hr,mm/dd/yyyy 12 hr,dd/mm/yyyy 24 hr,dd/mm/yyyy 12 hr
device.idle_display_value : V68.19.15Z
device.sensor_select :
device.jobs_print : 0
device.languages : hybrid_xml_zpl , Choices: zpl,line_print,hybrid_xml_zpl,epl_zpl,epl
device.cph_enable : off , Choices: on,off
device.cph_interval : 0 , Choices: 0-65535
device.macro_get :
device.user_p1 :
device.user_p2 :
device.uptime : 00 days 00 hours 04 mins 55 secs
device.volume : high , Choices: high,medium,low,off
device.local_menu_mode : off , Choices: off,on
device.printhead.
device.printhead.serialnum :
device.printhead.coldwarning :
device.printhead.resolution : 8.0
device.frontpanel.
device.frontpanel.line1 :
device.frontpanel.line2 :
device.frontpanel.line3 :
device.frontpanel.line4 :
device.frontpanel.xml : <FRONT-PANEL>
<STATUS-BAR>
<BLUETOOTH>NOT-CONNECTED</BLUETOOTH>
<WLAN>AUTHENTICATED</WLAN>
<SIGNAL-STRENGTH>4-BAR</SIGNAL-STRENGTH>
<MEDIA>MEDIA-PRESENT</MEDIA>
<ETHERNET>NOT-CONNECTED</ETHERNET>
<BATTERY-LEVEL>4-BAR</BATTERY-LEVEL>
<LATCH>LATCH-CLOSED</LATCH>
<ERROR>NO-PRINTER-ERROR</ERROR>
</STATUS-BAR>
<LCD>
<LINE1> Zebra QLn320 </LINE1>
<LINE2>FW Ver: V68.19.15Z</LINE2>
<LINE3>Baud Rate: 19200</LINE3>
<LINE4>Battery: ok</LINE4>
<LINE5>IP Addr: XXX.XXX.0.224</LINE5>
<LINE6></LINE6>
</LCD>
<NAVIGATION-BAR>
<M1>Menu</M1>
<M2></M2>
<M3></M3>
</NAVIGATION-BAR>
</FRONT-PANEL>
device.frontpanel.key_press
device.unique_id : XXQLJ164301731
device.xml.
device.xml.enable : on , Choices: on,off
device.ff_disable : off , Choices: on,off
device.pnp_option : cpcl , Choices: cpcl,zpl,epl
device.pnp_string : MANUFACTURER:Zebra Technologies;COMMAND SET:CPCL;MODEL:QLn320;CLASS:PRINTER;OPTIONS:XML;
device.download_connection_timeout : 0 , Choices: 0-65535
device.save_2key : off , Choices: on,off,now
device.print_2key :
device.print_reprogram_2key : on , Choices: on,off
device.epl_legacy_mode : off
device.cpcl_synchronous_mode : off , Choices: on,off
device.command_override.
device.command_override.add
device.command_override.clear
device.command_override.list :
device.host_identification : QLn320-200dpi,V68.19.15Z,8,8192KB
device.host_status : 159,0,0,2030,000,0,0,0,000,0,0,0
128,0,0,0,0,0,4,0,00000000,1,000
1234,0
device.super_host_status
device.pause
device.unpause
device.ltu_installed : no
device.cutter_installed : no
device.rewinder_installed : no
device.bluetooth_installed : yes
device.print_out_report, Choices: settings,network,formats,images,fonts,barcodes,all,sensor profile
device.diagnostic_print : disabled , Choices: disabled,enabled
device.job_log.
device.job_log.total_jobs : 0
device.internal_wired_setting_location : printer
device.print_geometry_revision : A
device.user_vars.
device.user_vars.create
device.user_vars.set_range
device.docked : no , Choices: yes,no
device.syslog.
device.syslog.enable : off , Choices: off,on
device.syslog.configuration :
device.syslog.save_local_file : no , Choices: no,yes
device.syslog.log_max_file_size : 10000 , Choices: 10000-400000
device.syslog.entries
device.syslog.clear_log
device.feature.
device.feature.mfi : present
device.feature.mcr : not available
device.feature.bluetooth_le : not available
device.feature.nfc : not available
device.configuration_number : QN3-AGNAJM00-00
device.alerts.
device.alerts.audible : cover_open:high,media_out:high,battery_low:high,replace_battery:high,nfc_read:high,nfc_write:high,mcr_read:high
device.pmcu.
device.pmcu.revision :
device.pmcu.desired_revision :
input.
input.capture : off , Choices: print,run,off
print.
print.contrast : 0 , Choices: 0-3
print.tone : 0 , Choices: -100..200
print.tone_format : cpcl , Choices: cpcl,zpl
print.tone_zpl : 10.0 , Choices: 0.0-30.0
print.print_adj : 0 , Choices: -127-128
mcr.
rtc.
rtc.time : 00:38:33
rtc.date : 07-06-2017
rtc.timezone : UTC00
rtc.exists : yes
usb.
usb.device.
usb.device.vendor_id : 0x0A5F
usb.device.product_id : 0x00BD
usb.device.device_version : 1.1
usb.device.product_string : ZTC QLn320-203dpi CPCL
usb.device.manufacturer_string : Zebra Technologies
usb.device.serial_string : QLn320
usb.device.device_id_string : MANUFACTURER:Zebra Technologies;COMMAND SET:CPCL;MODEL:QLn320;CLASS:PRINTER;OPTIONS:XML;
usb.device.device_unique_id : off , Choices: on,off
usb.connected : yes
usb.halt : no , Choices: yes,no
log.
log.reboot.
log.reboot.code : 7
log.reboot.reason : Idle timeout
log.reboot.codes : 777bb7b7bbbb7bbbbbbb7bbbbbbbbbb7
log.reboot.report : Idle timeout
Idle timeout
Idle timeout
Off key
Off key
Idle timeout
Off key
Idle timeout
Off key
Off key
Off key
Off key
Idle timeout
Off key
Off key
Off key
Off key
Off key
Off key
Off key
Idle timeout
Off key
Off key
Off key
Off key
Off key
Off key
Off key
Off key
Off key
Off key
Idle timeout
netmanage.
netmanage.type : none , Choices: none,avalanche
netmanage.status_code : 0
netmanage.state_code : 0
netmanage.error_code : 0
netmanage.avalanche.
netmanage.avalanche.model_name :
netmanage.avalanche.interval : 60000 , Choices: 0-4294967295
netmanage.avalanche.startup_update : off , Choices: on,off
netmanage.avalanche.interval_update : off , Choices: on,off
netmanage.avalanche.agent_addr : 0.0.0.0
netmanage.avalanche.available_agent : 0.0.0.0
netmanage.avalanche.available_port : 1 , Choices: 1-65535
netmanage.avalanche.encryption_type : 0 , Choices: 0-255
netmanage.avalanche.udp_timeout : 3000 , Choices: 0-4294967295
netmanage.avalanche.tcp_connection_timeout : 3000 , Choices: 0-4294967295
netmanage.avalanche.terminal_id : 0 , Choices: 0-65535
netmanage.avalanche.realtime_update_int : 300 , Choices: 0-4294967295
netmanage.avalanche.text_msg.
netmanage.avalanche.text_msg.print : off , Choices: on,off
netmanage.avalanche.text_msg.display : off , Choices: on,off
netmanage.avalanche.text_msg.beep : off , Choices: on,off
netmanage.avalanche.set_property
zbi.
zbi.revision : ZBI Version 2.1
zbi.state : off
zbi.last_error :
zbi.program_list, Choices: up,down,fill,execute
zbi.start_info.
zbi.start_info.file_name : *:\.BAZ
zbi.start_info.memory_alloc : 0
zbi.start_info.execute
zbi.control.
zbi.control.terminate
zbi.control.run
zbi.control.break
zbi.control.restart
zbi.control.step
zbi.control.variable_name :
zbi.control.variable_value :
zbi.control.add_breakpoint
zbi.control.delete_breakpoint
zbi.control.clear_breakpoints
zbi.control.line_number : 0
zbi.reseller_key
zbi.key : DISABLED
zbi.running_program_name :
zbi.key_version : 1.1
zpl.
zpl.calibrate
zpl.relative_darkness : 0 , Choices: -300-300
zpl.save
zpl.label_length : 2030 , Choices: 0-32000
zpl.left_position : 0 , Choices: -9999-9999
zpl.zpl_override : disabled , Choices: disabled,enabled
zpl.format_prefix : ^ (5E) , Choices: 00-FF,00-ff
zpl.command_prefix : ~ (7E) , Choices: 00-FF,00-ff
zpl.delimiter : , (2C) , Choices: 00-FF,00-ff
zpl.zpl_mode : zpl II , Choices: zpl II,zpl
zpl.system_status : 0,0,00000000,00000000,0,00000000,00000000
zpl.system_error : 0,0,00000000,00000000
zpl.no_errors_boot_done : yes
zpl.print_orientation : nor , Choices: nor,inv
zpl.label_top : 0 , Choices: -120-120
internal_wired.
internal_wired.ip.
internal_wired.ip.addr : 0.0.0.0
internal_wired.ip.netmask : 255.255.255.0
internal_wired.ip.gateway : 0.0.0.0
internal_wired.ip.port : 6101
internal_wired.ip.arp_interval : 0 , Choices: 0-30
internal_wired.ip.dhcp.
internal_wired.ip.dhcp.requests_per_session : 2 , Choices: 1-10
internal_wired.ip.dhcp.request_timeout : 2 , Choices: 2-30
internal_wired.ip.dhcp.session_interval : 10 , Choices: 0-60
internal_wired.ip.dhcp.lease.
internal_wired.ip.dhcp.lease.length : 0
internal_wired.ip.dhcp.lease.time_left : 0
internal_wired.ip.dhcp.lease.server : 0.0.0.0
internal_wired.ip.dhcp.lease.last_attempt : 0
internal_wired.ip.dhcp.cache_ip : off , Choices: on,off
internal_wired.ip.dhcp.cid_type : 1 , Choices: 0,1,2
internal_wired.ip.dhcp.cid_prefix :
internal_wired.ip.dhcp.cid_enable : off , Choices: on,off
internal_wired.ip.dhcp.cid_suffix : 00074D6FA42E
internal_wired.ip.dhcp.cid_all : 00074D6FA42E
internal_wired.ip.dhcp.option12 : on , Choices: on,off
internal_wired.ip.dhcp.option12_format :
internal_wired.ip.dhcp.option12_value : XXQLJ164301731
internal_wired.ip.dhcp.arp_verify : off , Choices: on,off
internal_wired.ip.protocol : all , Choices: all,bootp,dhcp,dhcp and bootp,gleaning only,rarp,permanent
internal_wired.ip.default_addr_enable : on , Choices: off,on,saved_ip
internal_wired.ip.timeout.
internal_wired.ip.timeout.enable : on , Choices: on,off
internal_wired.ip.timeout.value : 300 , Choices: 1-3600
internal_wired.ip.dns.
internal_wired.ip.dns.domain :
internal_wired.ip.dns.servers : 210.145.254.170 125.170.93.234
internal_wired.ip.wins.
internal_wired.ip.wins.addr : 0.0.0.0
internal_wired.ip.wins.permanent_source : off , Choices: on,off
internal_wired.ip.port_alternate : 9100
internal_wired.ip.port_json_config : 9200
internal_wired.mac_addr : 00:07:4D:6F:A4:2E
internal_wired.mac_raw : 00074D6FA42E
internal_wired.auto_switchover : on , Choices: on,off
internal_wired.installed : yes
internal_wired.link : no
internal_wired.activity_led : blink , Choices: blink,solid
rfid.
interface.
interface.network.
interface.network.settings_require_reset : no
interface.network.active.
interface.network.active.printserver : wireless
interface.network.active.ip_addr : XXX.XXX.0.224
interface.network.active.netmask : 255.255.255.0
interface.network.active.gateway : XXX.XXX.0.1
interface.network.active.protocol : dhcp
interface.network.active.default_addr_enable : on
interface.network.active.wins_addr : 210.145.254.170
interface.network.active.arp_interval : 0
interface.network.active.mac_addr : ac:3f:a4:89:ab:02
interface.network.active.mac_raw : ac3fa489ab02
interface.network.active.server_protocol : dhcp
interface.network.active.server_address : XXX.XXX.0.1
interface.network.active.dhcp_received_host_name :
interface.network.active.cable_type : Wireless 802.11n
interface.network.active.speed : 65
interface.network.active.rx_packets :
interface.network.active.rx_errors :
interface.network.active.tx_packets :
interface.network.active.tx_errors :
interface.network.active.protocol_error : None
cutter.
cutter.clean_cutter :
line_print.
line_print.buffer_height : 2400 , Choices: 412-2400
apl.
apl.enable : none , Choices: none
apl.framework_version : 1.2
apl.version : none
apl.o.
apl.o.graphics_byte_width : 72 , Choices: 0-255
formats.
formats.cancel_all :
ezpl.
ezpl.print_width : 576 , Choices: 2-576
ezpl.media_type : continuous , Choices: continuous,gap/notch,mark
ezpl.print_method : direct thermal , Choices: direct thermal
ezpl.tear_off : 0 , Choices: -120-120
ezpl.print_mode : rewind , Choices: tear off,peel off,rewind,cutter,delayed cut,linerless peel,linerless rewind,linerless tear
ezpl.reprint_mode : off , Choices: on,off
ezpl.head_close_action : feed , Choices: feed,length,no motion
ezpl.power_up_action : no motion , Choices: feed,length,no motion
ezpl.label_length_max : 39 , Choices: 1.0-39.0
ezpl.manual_calibration : complete , Choices: inProgress,complete
ezpl.label_sensor : 60 , Choices: 0-255
ezpl.take_label : 132 , Choices: 0-255
ezpl.restore_defaults, Choices: reload printer,reload network
alerts.
alerts.configured : COLD START,SNMP,Y,N,255.255.255.255,162,N
alerts.add
alerts.conditions : ALL MESSAGES, PAPER OUT, RIBBON OUT, HEAD TOO HOT, HEAD COLD, HEAD OPEN, SUPPLY TOO HOT, RIBBON IN, REWIND, CUTTER JAMMED, PRINTER PAUSED, PQ JOB COMPLETED, LABEL READY, HEAD ELEMENT BAD, BASIC RUNTIME, BASIC FORCED, POWER ON, CLEAN PRINTHEAD, MEDIA LOW, RIBBON LOW, REPLACE HEAD, BATTERY LOW, RFID ERROR, MOTOR OVERTEMP, PRINTHEAD SHUTDOWN, COLD START, SGD SET, SHUTTING DOWN, RESTARTING, NO READER PRESENT, THERMISTOR FAULT, INVALID HEAD, COUNTRY CODE ERROR, MCR RESULT READY, PMCU DOWNLOAD
alerts.destinations : SERIAL, PARALLEL, E-MAIL, TCP, UDP, SNMP, USB, HTTP-POST, BLUETOOTH, SDK
alerts.tracked_settings.
alerts.tracked_settings.zbi_notified :
alerts.tracked_settings.log_tracked :
alerts.tracked_settings.log :
alerts.tracked_settings.max_log_entries : 100 , Choices: 0-10000
alerts.tracked_settings.clear_log
alerts.http.
alerts.http.proxy :
alerts.http.logging.
alerts.http.logging.entries
alerts.http.logging.max_entries : 0 , Choices: 0-10000
alerts.http.logging.clear
alerts.http.authentication.
alerts.http.authentication.add
alerts.http.authentication.remove
alerts.http.authentication.entries :
weblink.
weblink.enable : off
weblink.printer_reset_required : no
weblink.restore_defaults
weblink.logging.
weblink.logging.entries
weblink.logging.max_entries : 0 , Choices: 0-10000
weblink.logging.clear
weblink.ip.
weblink.ip.conn1.
weblink.ip.conn1.location :
weblink.ip.conn1.retry_interval : 10 , Choices: 1-600
weblink.ip.conn1.proxy :
weblink.ip.conn1.maximum_simultaneous_connections : 10 , Choices: 1-100
weblink.ip.conn1.authentication.
weblink.ip.conn1.authentication.add
weblink.ip.conn1.authentication.remove
weblink.ip.conn1.authentication.entries :
weblink.ip.conn1.test.
weblink.ip.conn1.test.location : http://www.zebra.com/apps/linktest
weblink.ip.conn1.test.test_on : failure , Choices: off,failure,interval,both
weblink.ip.conn1.test.retry_interval : 900 , Choices: 1-1800
weblink.ip.conn1.num_connections : 0
weblink.ip.conn2.
weblink.ip.conn2.location :
weblink.ip.conn2.retry_interval : 10 , Choices: 1-600
weblink.ip.conn2.proxy :
weblink.ip.conn2.maximum_simultaneous_connections : 10 , Choices: 1-100
weblink.ip.conn2.authentication.
weblink.ip.conn2.authentication.add
weblink.ip.conn2.authentication.remove
weblink.ip.conn2.authentication.entries :
weblink.ip.conn2.test.
weblink.ip.conn2.test.location : http://www.zebra.com/apps/linktest
weblink.ip.conn2.test.test_on : failure , Choices: off,failure,interval,both
weblink.ip.conn2.test.retry_interval : 900 , Choices: 1-1800
weblink.ip.conn2.num_connections : 0
weblink.cloud_connect.
weblink.cloud_connect.enable : on , Choices: on,off
weblink.cloud_connect.connect
weblink.cloud_connect.status : NOT ACTIVE
weblink.cloud_connect.connection_key : 0000000000
weblink.cloud_connect.configuration_key : 0000000000
weblink.cloud_connect.configuration_confirmation : none , Choices: none,accept,reject,complete
capture.
capture.channel1.
capture.channel1.port : off , Choices: serial,usb,bt,parallel,off
capture.channel1.delimiter :
capture.channel1.max_length : 1000 , Choices: 1-3000
capture.channel1.count : 0 , Choices: 0-4294967295
capture.channel1.data.
capture.channel1.data.raw :
capture.channel1.data.mime :
nfc.
cradle.
""
Points: 0
You voted ‘up’
Hi Yuriko,
Thank you for the report! Are you printing using Zebra Setup Utilities to send the CPCL to the printer or another program?
One thing I noticed with your settings is that your printer's not on the latest firmware. Try updating to V68.20.01Z. The new firmware can be found here on the QLn320 product page, and here's a tutorial on updating firmware. After installation, you can check the version of the firmware by looking at the display screen on the printer or by sending the following command to the printer:
! U1 getvar "device.host_identification"
Points: 0
You voted ‘up’
Hi Samantha,
Thank you for the quick reply!
We are using another program,
but it just send a code to printer, and works for both CPCL and ZPL except CPCL 2D barcode
so I think the program is fine.
We will try again after updating firmware, and let you know the result.
Thank you!
Points: 0
You voted ‘up’
Hi Yuriko,
Sounds good! If updating the firmware does not work, then I would recommend trying it through Zebra Setup Utilities to confirm that it is not an issue with the program.
Points: 0
You voted ‘up’
I am having the same issue here, it is printing QR Code with the ZQ520 using CPCL.
Is there any solution to this yet?
Points: 0
You voted ‘up’
Hi,
Could you please share:
1) Your CPCL code
2) Result of the following SGD command:
! U1 getvar "allcv"
You can capture SGD command result following an advice in this article:
https://www.zebra.com/us/en/support-downloads/knowledge-articles/printer...
Alexander Palchikov
Software Engineer, Kutir Mobility
Posted on behalf of Zebra Technologies
Points: 0
You voted ‘up’
I am using the example provided in the documentation: https://www.zebra.com/content/dam/zebra_new_ia/en-us/manuals/printers/co...
! 0 200 200 210 1
BARCODE PDF-417 10 20 XD 3 YD 12 C 3 S 2 PDF Data
ABCDE12345
ENDPDF
PRINT
This does not work.
The printer is ZQ520 and I've updated the firmware to V76.20.22Z
Points: 0
You voted ‘up’
Log in to post comments